Stronghand Adj. Inside/Outside Angle Magnet-156X156X20Mm | Magnetic Positioners Sharp Edge 25mm - Hex Flange Nuts

25mm - Hex Flange Nuts Qty per pack = 50 - CBP45 - M8 x 1

creates retrofit tether point

- Air Keel

Right Handed Holder Size: 3/8 x 7/8 x 5 Tool Bit Size: 1/4 inch For Lathes of Approx Swing: 10 to 12

GZ44902 - GROZ NEEDLE NOSE QUICK CONNECT ADAPTOR 15MM AQD/11-16/B QUICK CONNECT ADAPTORS CATALOGUE: GROZ LUBRICATION EQUIPMENT PAGE: CC 46 NEEDLE NOSE ADAPTOR * USEFUL FOR DISPENSING A FINE LINE OF GREASE THROUGH THE NEEDLE NOSE IN GREASING HARD TO REACH FITTINGS ON TRUCKS VANS AND RECREATIONAL VEHICLES

Stronghand Adj. Inside/Outside Angle Magnet-156X156X20Mm | Magnetic Positioners Sharp Edge 25mm - Hex Flange NutsSHMLA600 Stronghand AdJ. Inside Outside Angle Magnet 156 x 156 x 20mm Inside Outside Angle Magnets Hold stock using the Inside or Outside edges! Hold stock from the outside leaving clearance for inside welds or hold stock from the inside for outside welds. Hold and position sheet metal round pipes square angled or flat stock. The Inside Outside Angle Magnets are constructed from two independent rectangular magnets for consistent undiminished magnetic