697066 - Timer Kit - Mechanical 60 Minute w/"Hold" Position, 1/4" (6 MM) D-Shaft, 3/8" Threaded Sleeve Panel Mount Part Type_Wheel Introducing the 697124 Timer Kit

Introducing the 697124 Timer Kit

• External Dimensions: 26

Horizontal Mount - the mounting screws are aligned horizontally (at 3 and 9 o'clock) and the OFF position is at approximately 2 o'clock on the timer dial face

6N12A-2D Conventional Motorcycle Battery (flooded cell) with vent tube (if applicable) and terminal hardware

Wirelessly communicates to optional test results printer via infrared or outputs to PC via AC-12 cable

697066 - Timer Kit - Mechanical 60 Minute w/"Hold" Position, 1/4" (6 MM) D-Shaft, 3/8" Threaded Sleeve Panel Mount Part Type_Wheel Introducing the 697124 Timer Kit60 Minute Mechanical Timer & Hardware Kit This timer can be used to replace older 60 minute electrical and mechanical timers found in many models of battery chargers. A cost effective retro fit to replace more expensive OEM timers. Designed to be easy to install through a 3 8" stem mounting hole. Wire terminals use . 250" industry standard solderless push on connectors. No AC power is required to run this timer. No specialty tools required. When